Find the right compressor in 30 seconds.
1 · WHAT WILL THE AIR BE USED FOR?
2 · HOW DOES YOUR AIR DEMAND VARY?
DENAIR compressors with SKF bearings, Schneider electrics and performance documented per ISO 1217 — imported directly from the factory, delivered and serviced in Norway. PM VSD cuts energy cost by up to 35 %.
*2-year factory warranty from DENAIR + 1 extra year from Globe Energy Norway with a service agreement using genuine parts.
Replace an older fixed-speed compressor with DENAIR PM VSD and the savings often pay for the machine in under two years. Drag and see:
DENAIR builds with the same component suppliers as the European premium brands — documented in every datasheet:
bearings in the air ends (Sweden)
Schneider Electricelectrical components (France)
PLC control, centrifugal series
maintenance-free couplings (Germany)Three main lines cover everything from vehicle workshops to process industry — with matching dryers, tanks and filters.
Permanent magnet motor and variable speed. The compressor tracks air demand in real time and cuts energy use by up to 35 %.
Two compression stages deliver best-in-class efficiency in continuous operation. For production where every kWh counts — shift after shift.
Robust screw compressors for steady air demand, plus a complete range of refrigerated and desiccant dryers protecting tools and pipework.
DENAIR delivers premium-class performance — documented per ISO 1217 — at an investment typically 20–40 % below leading European brands. And over ten years, energy is around 75 % of total cost — which is where PM VSD technology wins every single operating hour.
We size by measured air demand — not by catalogue.
Vehicle workshop · Tyres · PaintImpact wrenches, lifts and spray guns draw air in bursts — exactly where VSD saves the most and fixed speed wastes energy idling. We deliver a complete package with compressor, tank and refrigerated dryer, fully commissioned.
Recommended: DAV-7 to DAV-22 + DAD dryer
Industry · ManufacturingIn continuous operation, energy dominates total cost — around 75 % over ten years. Two-stage DAV+ and correct sizing deliver documented six-figure annual savings in larger plants.
Recommended: DAV-37 to DAV-355 · DAV+ for high running hours
Construction · ContractorMobile compressed air where the job is — drilling, sandblasting and rock support, up to 33 m³/min and 35 bar. The DADY-55 is 100 % electric for zero-emission sites and tenders with environmental requirements.
Recommended: DADY-55 all-electric
Aquaculture · Maritime · FisheriesCompressed air for feed distribution, oxygenation and net cleaning — built for marine duty with tank-mounted machines and corrosion-protected receivers. Service along the entire coast, not from an office abroad.
Recommended: DA/DAV Ti tank-mounted · galvanised tank
Food · Fish processingWhere air meets the product, oil-free is a requirement, not a choice. The DWW series delivers 100 % oil-free compressed air for processing, packaging and MAP — with dryers and filters to match the air quality class.
Recommended: DWW oil-free · dew point to requirement
Pharma · Lab · ElectronicsCritical processes demand oil-free air at low dew points — down to −70 °C. Oil-free DWW machines combined with desiccant dryers give documented air quality for cleanrooms and production.
Recommended: DWW oil-free + DAD desiccant dryer
“On-call service around the clock. 365 days a year.”
The difference is in the value chain, not the machine. We import directly from the factory with no middlemen — and DENAIR builds with the same component suppliers as the premium brands: SKF bearings, Schneider electrics, GHH screw elements.
A workshop with 2–4 lifts typically needs 7.5–11 kW, larger workshops 15–22 kW, industry from 37 kW. But the right answer requires reviewing actual demand — use the calculator or request a free analysis.
Call +47 401 50 004 — the on-call line answers around the clock and dispatches a technician immediately on breakdowns. Production stops take priority over everything else.
Enter your key figures in the calculator — compressor size, operating hours and electricity price — and you get a concrete savings calculation and a quote within 48 hours. Most installations pay for themselves in under two years on energy savings alone.
Open the savings calculatorThrough the Globe Energy group we deliver GRASEN DC fast chargers with installation, operation and service — for businesses, property owners and parking operators across Norway.